Rescue & Recovery:

Products that save lives

Home : Products : Lifebuoy Equipment : Individual Components : Mounting Poles (for Lifebuoy Housings)

Mounting Poles (for Lifebuoy Housings)

Mounting poles for our Lifebuoy Housings, in Galvanised Steel or Glass-Reinforced Plastic.

Specifically designed for optimum presentation of our Lifebuoy Housings, and suitable in both commercial and leisure environments, whether salt-water or fresh-water. Each pole will fit both the 24" and 30" Housings, simply slotting into a recess in the back of the Housing and fixed in place by screwing/bolting.

(This item is also included in some of our Pre-Packed Sets )

NB:
Standard Housing   uses a single pole (either Galvanised Steel or GRP)
Integrated Housing normally mounted on two GRP poles (but if you wish to use a single Galvanised pole instead, an Adapter is also available)

 

(This item is also included in some of our Pre-Packed Sets )

Poles with Base-Plate for Lifebuoy Housings
DescriptionPrice Inc VATPrice Ex VATQty
Pole (sub-surface) (Galvanised)£62.40£52.00
Pole (hard-surface) (Galvanised)£68.40£57.00
Pole (sub-surface) (GRP)£45.60£38.00
Pole (hard-surface) (GRP)£45.60£38.00

Options

Options:

(1) Mounting Surface:

  • Soft: we supply long poles for embedding/cementing into a soft surface ("sub-surface") eg a canal-bank.
  • Hard: when the pole is to be mounted to a hard surface eg a wooden jetty, we offer poles with base-plates for through-bolting.

(2) Material:

  • Galvanised Steel: Tough and durable, this option is often used in corrosive salt-water environments or where resistance to vandalism is particularly important
  • Glass-Reinforced Plastic: A more aesthetic option, and at a lower cost, often used in less vulnerable environments

Specifications

Specifications:

(1) Long Pole (sub-surface):

  • Material: Galvanised Steel or Glass-Reinforced Plastic
  • Length: Galvanised: 2050 mm   GRP: 2000 mm
  • Cross-section:  Galvanised:  Rectangular 60 x 40 mm  GRP: Circular 60 mm diameter
  • Weight:  Galvanised: 8 kg  GRP: 2.5 kg
  • Supplied with either a stainless steel nut/bolt (Galvanised pole) or 2 stitch-screws (GRP pole) to secure the Housing to the Pole

(2) Base-Plate Pole (hard-surface):

  • Material: Galvanised Steel or Glass-Reinforced Plastic
  • Length: 1500 mm
  • Cross-section: Galvanised: Rectangular 60 x 40 mm  GRP: Circular 60 mm diameter
  • Weight: Galvanised: 7.5 kg  GRP: 3.1 kg
  • Base-plate:  Galvanised: 200 x 200 mm with 4 bolt-holes 13mm diameter
    GRP: circular 200 mm diameter with 4 bolt-holes 13 mm diameter
  • Supplied with either a stainless steel nut/bolt (Galvanised pole) or 2 stitch-screws (GRP pole) to secure the Housing to the Pole

Downloads

Download:

Download PDF(1) Installation Instructions - Standard Lifebuoy Housings (pdf file, 639 KB)

Download PDF(2) Installation Instructions - Integrated Lifebuoy Housings (pdf file, 557 KB)

Media

  Poles with Base-Plate for Lifebuoy Housings  Poles with Base-Plates for Lifebuoy Housings

Related Products

Back to Listing Previous Next

Proud to be working with

Need to get in touch?  Call +44 (0) 1202 657814

Address

I.C. Brindle & Co. Ltd
15 Moor Road,
Broadstone,
Dorset,
BH18 8AZ
England